Heavy-Duty Shelf Bracket (Extremely Strong & Tested)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy Duty Modular Shelf Bracket
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
Heavy-duty, custom-designed shelf bracket engineered for maximum strength and stability. As seen in my setup holding heavy filament rolls, these brackets are incredibly robust and reliable.
Recommended Print Settings:
Filament: ABS is strongly recommended for the best balance of strength, heat resistance, and rigidity.
Perimeters / Walls: At least 4 walls for superior load-bearing capacity.
Infill: 15% (with strong infill patterns like Gyroid or Cubic).
Installation Guide:
For maximum structural integrity, follow this precise installation sequence:
First Step: Mount the bracket to the wall using the primary holes (marked as #1). Use 8x40 mm wall plugs for a secure anchor.
Second Step: Once the bracket is anchored, drive in the remaining screws into the secondary holes (marked as #2), making sure to use appropriately longer screws.
This specific installation method and multi-hole configuration lock the bracket firmly in place, providing exceptional load capacity. Check out my shelves in the photos to see them in action!