1 / 5
Knitted Christmas Mince Pie Ornament - No AMS — zdjęcie 1
1 / 5

Knitted Christmas Mince Pie Ornament - No AMS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A knitted mince pie Christmas ornament with a crimped lid, star, holly and a kawaii face. No AMS needed.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
17
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

A knitted mince pie with a crimped pastry lid, a chocolate star, a sprig of holly and a happy little face. No AMS: one colour per plate, glued together.

Files

  • 3MF: kawaii_mince_pie.3mf. Bambu Studio project with every plate laid out and my tested settings. PrusaSlicer and OrcaSlicer open the geometry too.

  • 3MF, AMS: kawaii_mince_pie_ams.3mf. The same parts on 2 plates with the colours set, at most 4 a plate, printed one part at a time.

Part of my Knitted Christmas Ornaments collection. The others: Wreath, Gingerbread, Robin, Christmas Tree, Christmas Pudding.

Leave one out for Father Christmas. This one will not go stale.

What do I print?

  • Hanging ornament: 17.0 g, 1 h 58 (sliced for the A1 mini)

  • AMS, 2 plates, up to 4 colours each: 17.3 g, 1 h 32 (sliced for the A1 mini)

No AMS? Every plate in the no-AMS file is one colour: just load the next spool. Got an AMS? The AMS file puts the same parts on 2 plates with the colours set, at most 4 a plate so one AMS is enough, and prints one part at a time so it only changes colour a few times. Either way the parts glue together the same. About 50 mm across and 32 mm tall (45 mm with the loop).

How to make it

  1. Print the face in black, the cheeks in pink, the case in caramel, the lid and loop in latte brown, the star in dark brown, the holly in green and the berries in red.

  2. Glue the eyes, smile and cheeks into their pockets on the case.

  3. Glue the lid on: the two pins only go in one way round.

  4. Glue the star, holly leaves and berries into their pockets on the lid, then push the loop's tab through the star into the lid with a dot of glue.

Printing

  • Every part prints flat or upright with no supports; the add-ons have flat backs and drop into flat-bottomed pockets.

  • The lid prints on its flat underside, so its overhanging crimped edge needs no support.

  • Brims are on (5 mm) for the small parts; peel them off.

  • The loop prints flat, so it is strong, and takes twine, thin cord or ribbon up to about 6 mm wide.

Prints at 0.12 mm (fine) for the knit detail; small add-ons at 0.20 mm.

  • Material: PLA Matte; eyes and smile PLA Basic Black, cheeks PLA Basic Hot Pink

  • Layers: 0.12 mm (fine); small add-ons 0.20 mm

  • Walls: 2

  • Infill: 10 %

  • Brim: 5 mm, outer only

  • Supports: none

In the photos

Every photo is a print from the 3MF here. The group shot shows it with the Christmas Tree and the Christmas Pudding.

A decoration, not a toy.

Update log

  • v1.1: added the AMS file.

  • v1.0.1: first release on Printables (no face fit test, hanging version only).

The design and testing here are mine, Claude helped with the code that builds the shapes.

If it is useful, a like and a make with a photo really help. I read every comment.

Also on MakerWorld: https://makerworld.com/en/models/3529226-kawaii-knitted-mince-pie-christmas-ornament

Tagi