Ender 3 X gantry squaring help
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use these templates to square the X axis gantry of an Ender 3 or other bed slingers.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Using a ruler or calipers to measure the distance of the X axis gantry on each side can be tedious work. Every time I got it measured on one side something moved before I could measure it on the other side. These templates make it very easy to set an equal distance on both ends of the X axis gantry and adjust all the bolts to square it with the rest of the frame.
What you need is four M4 bolts and the same amount of T nuts. Simply fix the templates to the top and side bars of the frame making sure they sit square against the top bar. Then tighten all screws of the X gantry to fix it in position. Remove the templates and you're good to go.