Ender 3 X gantry squaring help
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use these templates to square the X axis gantry of an Ender 3 or other bed slingers.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Using a ruler or calipers to measure the distance of the X axis gantry on each side can be tedious work. Every time I got it measured on one side something moved before I could measure it on the other side. These templates make it very easy to set an equal distance on both ends of the X axis gantry and adjust all the bolts to square it with the rest of the frame.
What you need is four M4 bolts and the same amount of T nuts. Simply fix the templates to the top and side bars of the frame making sure they sit square against the top bar. Then tighten all screws of the X gantry to fix it in position. Remove the templates and you're good to go.