GPU Support for Bottom Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, modular, adjustable support post to prevent GPU sag.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
at the request of reddit user u/AetheriaInBeing, I designed a GPU support to mount to the bottom fan location of a computer case. this model can be mounted to the case directly, or attached to a bottom fan. the design should not significantly impede airflow through a fan.
the support is in three parts: a base (either 120mm or 140mm), a riser (30-170mm in 20mm increments), and a bolt. the bolt screws into the top of the riser for fine-tuning the height. no supports are required for any part of the model.
with the smallest riser and the bolt inserted all the way, the overall system has a height of 36mm.
I recommend printing at 0.2mm layer height or finer, due to the screw threads.