Boksen Loge - Decorative Slatwall box using hidden clips in proper orientation for strength (Proslat compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I put a proslat wall in my office for the versatility of pegboard without the holes aesthetic. Prints with no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Welcome to the Boksen Loge!
A selection of human made 3d printable slatwall shelves to offer utility and aesthetics. I have provided a few variants from my own usage in horizontal and vertical orientation. These are made to hang only one direction in order to have as clean a look as possible. These will all fit on a 350 x 350 bed and there are smaller variants for smaller printer beds (>200mm).
Dimensions listed in the names are Width Height and Depth
I have printed my samples from PLA on a modified Sovol SV08 in a single loop for strength. The U-hangers are meant to print on their side in order to have best strength and no supports.
Standard disclaimer that these are home made so they are not load rated and different printing and environmental conditions will vary how much weight they can carry. I varied the number of hangers so that they should work fairly well even on the wider shelves. The top of the box is the strongest part of the shelf as it has the support of the U-hangers while the bottom is floating and may deform over time.
I have also included my freecad files so that if anyone else wants to make more variants you are more than welcome to pick up from my slapdash cad work. I used this as a practice project while learning freecad so the files are not ideal but you should be able to get in and change the base dimensions fairly easily.
Have fun and enjoy your new Boksen Loge
-Montana