25mm Wafer for Glued Connections
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small wafer or disc to help glue across joints to provide more structure to multi-piece projects.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
This is a small wafer or disc to help glue across joints to provide more structure to multi-piece projects.
The original use case was for a multi-part helmet that had no notches or grooves for alignment or connecting the pieces together. A dollop of hot glue is applied to the disc and then pressed across the joint.
It is 25mm wide and 0.6mm thick. It is 3 layers on most print setups, so sturdy enough to hold, but thin enough to flex to match curves. If you are using hot-glue, the disc does soften as the glue is applied and will mold to the space a bit more as well.