25mm Wafer for Glued Connections
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small wafer or disc to help glue across joints to provide more structure to multi-piece projects.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
This is a small wafer or disc to help glue across joints to provide more structure to multi-piece projects.
The original use case was for a multi-part helmet that had no notches or grooves for alignment or connecting the pieces together. A dollop of hot glue is applied to the disc and then pressed across the joint.
It is 25mm wide and 0.6mm thick. It is 3 layers on most print setups, so sturdy enough to hold, but thin enough to flex to match curves. If you are using hot-glue, the disc does soften as the glue is applied and will mold to the space a bit more as well.