Modular Slatted Pendant Lamp (Flat-Pack, No Supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular flat-pack E27 pendant lamp. Prints completely flat with zero supports. Easy assembly with 32 slats.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A slatted pendant lamp designed for incredibly easy 3D printing. The entire model is modular and prints completely flat on the build plate, meaning absolutely zero supports are needed.
The assembly consists of a top ring, a bottom ring, and exactly 32 individual slats that slide together. This creates a beautiful light diffusion and a clean, modern look for any room.
Socket Compatibility: Designed specifically for a standard E27 socket. The top ring is 4 mm thick but features a smart 38 mm wide, 2 mm deep recess (with a 36 mm center hole). This recessed design allows the socket to sit perfectly inside the ring, making it much easier to tighten the socket's retaining ring securely.
Printing Instructions:
Material: PETG (recommended for heat resistance) or PLA (only with low-heat LED bulbs).
Layer height: 0.2 mm (or 0.3 mm for a faster print).
Supports: None.
Infill: 15%.
Assembly:
Secure the top ring to your E27 pendant light socket.
Insert just one vertical slat into a slot on the top ring.
Snap the bottom ring onto this first slat to stabilize the frame.
Slide the remaining 31 slats into place across the top and bottom rings to complete the structure.