Solar Panel Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing is a customisable support bracket for aluminium framed solar panels, which slots onto the frame under the…
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 284
- Wydruki
- 1
- Wyświetlenia
- 2021
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This thing is a customisable support bracket for aluminium framed solar panels, which slots onto the frame under the panel. Print it any way you like.
I needed a bracket for a small 10W solar panel that I was using on a self contained automatic watering system for my veg patch, so I came up with this.
V1.1 Added a panel frame width parameter to allow for different frames.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Steel
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm layer
Infill:
30%
Notes:
This was printed in PLA with a 0.4mm nozzle with 0.2mm layers, but the settings aren't that important for this model.
Post-Printing
After clean-up
Category: DIY