Mennekes 10828 Schuko Stecker Ersatz-Halteband
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ersatzteil für das originale Halteband des Mennekes 10828 Schuko Steckers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Deutsch
Mennekes 10828 – Ersatz-Halteband
Da das original Halteband des Mennekes 10828 Steckers leider nicht einzeln als Ersatzteil erhältlich ist und ein abgerissener Deckel schnell zu verschmutzten Kontakten führt, habe ich dieses Ersatzteil designed.
Eigenschaften: Passgenau für den Mennekes 10828, schützt vor dem Verlust des Deckels und hält die Kontakte sauber.
Druckempfehlung: Gedruckt in TPU (Flex-Filament) für die perfekte Mischung aus Flexibilität und Haltbarkeit. Bisherige Praxistests im Alltag verlaufen sehr erfolgreich!
Montage: Die Montage des Ersatz-Haltebands erfolgt analog zum originalen Halteband (bzw. dem originalen Bauteil des Mennekes 10828 Steckers).
Wichtiger Sicherheitshinweis / Disclaimer: Arbeiten an elektrischen Anlagen und Betriebsmitteln dürfen gemäß DGUV Vorschrift 3 (und DIN VDE 0105-100) grundsätzlich nur von qualifiziertem Elektrofachpersonal (bzw. unter Leitung und Aufsicht einer Elektrofachkraft) durchgeführt werden. Der Anwender handelt eigenverantwortlich.
Viel Spaß beim Nachdrucken! Über ein Feedback oder ein geteiltes Foto eurer Prints freue ich mich.
--------------------------------------------------------------------------------------------------
Englisch
Mennekes 10828 – Replacement Lid Strap
Since the original retaining strap for the Mennekes 10828 plug isn't available as a standalone spare part—and a lost lid quickly leads to dirty contacts—I designed this replacement strap.
Features: Custom-fit for the Mennekes 10828, prevents losing the protective cap, and keeps your contacts clean.
Print Settings: Recommended to print in TPU for the ideal balance of flexibility and durability. Real-world testing has been very successful so far!
Assembly: Installation of the replacement lid strap is done in the exact same way as the original strap on the Mennekes 10828 plug.
Important Safety Disclaimer: According to safety regulations, work on electrical systems and equipment must be carried out exclusively by qualified electricians or under their direction and supervision. Users assume all responsibility and liability for installation and use.
Happy printing! Feel free to leave feedback or post a photo of your makes.