Waveshare ESP32-C5 Case w/ Antenna and Pin Header
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slim case for the Waveshare ESP32-C5 development board with external antenna and pre-soldered headers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
While the original model by @ChinookEDC fits the Waveshare ESP32-C5 development board with an internal antenna and the remix by @MarkusJotter_2980653 neatly integrates the SMA adapter for the board with an external wifi antenna, you cannot fit the version with pre-soldered pin headers into the case. My remix closes this gap :)
The pin headers stick out of the case, so the whole thing can still be pushed onto a breadboard. Both USB-C ports and the boot and reset buttons are easily accessible, and there's a cutout for the RGB LED. The case snaps together neatly and nothing rattles around.
It's a rather simple modification done entirely in PrusaSlicer using positive and negative volumes, I'm not sure how well other slicers like the format. I printed it in PLA on the standard 0.15mm profile and it came out great.