Snowflake Polymer Clay Cutter (32 mm, free)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 32 mm snowflake clay cutter with a matching pusher, for polymer clay earrings and charms. No supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
A polymer clay cutter for earrings and charms: a six-armed snowflake with a hexagon window in the centre, about 32 mm across. It comes with a matching pusher that presses the cut piece out cleanly, so the clay keeps its shape.
Printing: both parts print flat with no supports, at 0.2 mm layers and 15% infill, on any FDM printer with a 0.4 mm nozzle; about 19 min and 4 g of PLA for the cutter, 18 min and 5 g for the pusher. Print the cutter with its sharp edge facing up. The STL and 3MF open in any slicer.
Using it: roll the clay evenly (3 to 4 mm suits earrings), press the cutter straight down, then push the piece out with the pusher. A dusting of cornstarch on the clay stops it sticking.
This is one size from the Snowflake Polymer Clay Cutter Set (3 sizes): the full set has 24, 32 and 40 mm cutters and pushers, for $2.99 at https://shop.ash10.dev/p/model-3d-snowflake-polymer-clay-cutter-set-3-sizes-zsm4?utm_source=printables&utm_medium=referral&utm_campaign=free_sample&utm_content=snowflake_clay_cutter_32