Snowflake Polymer Clay Cutter (32 mm, free)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 32 mm snowflake clay cutter with a matching pusher, for polymer clay earrings and charms. No supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 1
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
A polymer clay cutter for earrings and charms: a six-armed snowflake with a hexagon window in the centre, about 32 mm across. It comes with a matching pusher that presses the cut piece out cleanly, so the clay keeps its shape.
Printing: both parts print flat with no supports, at 0.2 mm layers and 15% infill, on any FDM printer with a 0.4 mm nozzle; about 19 min and 4 g of PLA for the cutter, 18 min and 5 g for the pusher. Print the cutter with its sharp edge facing up. The STL and 3MF open in any slicer.
Using it: roll the clay evenly (3 to 4 mm suits earrings), press the cutter straight down, then push the piece out with the pusher. A dusting of cornstarch on the clay stops it sticking.
This is one size from the Snowflake Polymer Clay Cutter Set (3 sizes): the full set has 24, 32 and 40 mm cutters and pushers, for $2.99 at https://shop.ash10.dev/p/model-3d-snowflake-polymer-clay-cutter-set-3-sizes-zsm4?utm_source=printables&utm_medium=referral&utm_campaign=free_sample&utm_content=snowflake_clay_cutter_32