Cat Loaf - 4 colour AMS figure, 83 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cat folded into a loaf: paws tucked under, eyes shut, tail curled along the side.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
A cat folded into a loaf: paws tucked under, eyes shut, tail curled along the side. 83 mm tall, four colours, prints in one go on an AMS. Cream body, ginger tail and ears, pink cheeks, dark eyes and nose - all printed, nothing painted.
FOUR-COLOUR 3MF INCLUDED. The colours are painted onto the model and mapped to four AMS filaments - load the spools and print, no pausing and no colour-change scripts. A single-body STL is included if you want it in one colour.
THIS MODEL WAS GENERATED WITH AI. The base shape came out of Meshy.ai from a text prompt. From there the mesh was rebuilt as a watertight solid, the colours were taken off the generated texture and assigned to four AMS filaments, and a base pad was added so the figure has a real first layer. The form itself is AI-generated and is declared as such.
PRINT NOTES
Supports are needed (tree, auto), mostly under the chin and the tail.
589 filament changes. The purge tower is part of the project - do not delete it. Be warned: most of the 212 g goes into that tower, the figure itself is around 45 g. That is the price of four colours on an AMS, not a settings mistake.
15 h 45 min and 212 g at 0.20 mm on a P2S. Scaling down is the obvious move if that is too much.
The figure sits on a built-in base pad, so the first layer is 2714 mm2 - no raft needed, brim is enough.
SETTINGS: 0.20 mm layers, 3 walls, 15 percent gyroid. Nothing exotic - the time comes from the colour changes, not from the settings.