3g Cable Organizer Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3g Cable Organizer Lightweight Clip
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Standard Digital File License
Just 2 grams to keep your cables tidy
Keep your cables neatly coiled with a compact, reusable organizer weighing just 3g.
The S-shaped design holds both sides of a coiled cable in two opposing compartments. Inward-facing tabs help retain the cable, narrowing the openings to reduce the chance of loops slipping out while keeping insertion and removal straightforward.
Small enough to carry in a tech pouch or backpack, it is a practical accessory for your desk, drawers and everyday travel.
Features
Only 2g: a lightweight accessory with minimal filament use.
Inward grip tabs: help keep cable loops inside the clip.
Rounded tips: make insertion and removal easier.
Reusable design: organize, release and coil your cables again.
One-piece print: no assembly, screws or glue.
No supports required: print flat on the build plate.
Dimensions
40 × 15 × 10.5 mm
Suitable for charging cables, USB cables and other small cords that fit comfortably inside the compartments. Capacity depends on cable thickness and the number of loops.
Recommended print settings
Setting | Recommendation |
|---|---|
Material | PLA or PETG |
Nozzle | 0.4 mm |
Layer height | 0.20 mm |
Wall loops | 4 |
Infill | 15% |
Top / bottom layers | 4 |
Supports | No |
Brim | Normally unnecessary |
Scale | 100% |
Place the flat S-shaped face on the build plate, with the walls extending upward.
The stated 3g weight applies to the provided print profile; material and slicing settings may affect the final weight.