Cannelure Fruit Fly Trap, Screw-Together, No Glue
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reusable fruit fly trap with fine vertical grooves. Two parts screw together, no glue, MAX fill line inside the base.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 3
- Wyświetlenia
- 47
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A reusable fruit fly trap for the kitchen counter. Two pieces that screw together, no glue and no drilling. The Cannelure pattern runs narrow vertical grooves around the base, above a smooth plain band, so it looks at home next to the fruit bowl instead of looking like lab equipment.
Fill the base to the MAX line molded inside the rim, twist the funnel on until snug, and set it out. Empty and rinse when it fills up.
Parts
Base, the patterned body that holds the bait. Fill line marked MAX molded on the inside wall.
Funnel, threads onto the base and narrows to a small opening flies find easy to enter and hard to leave.
Assembly
Mix the bait (see recipe below) and pour into the Base up to the MAX line.
Thread the Funnel onto the Base clockwise until snug.
Set on the counter near the fruit bowl or bin.
Bait recipe
Ingredient | Amount | Purpose |
|---|---|---|
Apple Cider Vinegar (ACV) | Fill to about 1/3 of the Base | The classic fruit fly magnet, mimics rotting fruit |
Dish Soap (liquid) | 2 to 3 drops | Breaks the surface tension so they sink |
Sugar or fruit scraps (optional) | 1 tsp sugar or a piece of banana | Extra sweetness to boost the aroma |
Dimensions
Ø52 x H62 mm assembled.
Print settings
3 wall loops, 15% lightning infill, concentric top and bottom surface. The Base and Funnel print one after another on a single plate (sequential printing), so a single nozzle never has to purge between them.