1 / 9
Cannelure Soap and Sponge Tray, Dripping Plate, Drain Notch — zdjęcie 1
1 / 9

Cannelure Soap and Sponge Tray, Dripping Plate, Drain Notch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Soap and sponge tray with fine vertical grooves. A slotted dripping plate, and a notch to pour the water out.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A soap and sponge tray wrapped in fine vertical grooves below a smooth rim. The soap or the sponge rests on a slotted Dripping plate, above the water that collects in the Base.

A notch at one end of the plate lets you pour the water out without taking the plate out.

Sizes

Parts

  • Base: the grooved tray body. Small bumps inside hold the Dripping plate in place.

  • Dripping plate: the slotted plate the soap or the sponge rests on, with the drain notch at one end.

Use

  1. Press the Dripping plate into the Base. The bumps hold it in place.

  2. Put the soap or the sponge on the plate.

  3. To empty the water, tilt the tray over the sink on the notch side. The plate stays in.

Print settings

  • 3 walls

  • 15% lightning infill

  • No supports, no brim

Plate 1 holds the Base and the Dripping plate, printed one after the other (By object), each with its own filament. Everything is already set in the files.

Tagi