Extra Feet for Eryone Thinker Printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra feet for aluminum extrusion. Whenever I needed to turn one of my Eryone Thinker printers to get access to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Extra feet for aluminum extrusion. Whenever I needed to turn one of my Eryone Thinker printers to get access to something, they would tip over due.. so I made these to prevent that.
There's two different versions. One has the printed twist t-nut so you can just print and twist on. The other uses an M4 screw and t-nut if you are having problems with the printed t-nut version. No supports needed except for on the printed t-nut if you decide to print that.
While these are originally for the Thinker printers, I'm sure you can use them for other printers using aluminum extrusions.. you'll just need to scale the z height to fit your printer.
Category: 3D Printer Accessories