$10 Magnetic Toolbox Tape Storage Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very sturdy tape holder using a $5 magnetic bar from Harbor Freight and 3 ft of SCH 40 1/2" PVC pipe
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
Very sturdy tape holder using 3 ft of SCH 40 1/2" PVC pipe cut into 18 in. segments, a U.S. GENERAL 18 in. Magnetic Tool Holder from Harbor Freight, two M4 nuts and bolts, and a bit of CA glue. Attached as shown the rack can be removed fairly easily lifting up but requires significant effort to separate from the toolbox pushing down.
I printed these out of ABS using a 0.4 mm nozzle with 3 perimeters and 15% infill. PETG should also work fine, and I expect PLA could work as well since you would run out of space filling the rack with tape well before straining the print.
Link to the magnetic bar: