$10 Magnetic Toolbox Tape Storage Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very sturdy tape holder using a $5 magnetic bar from Harbor Freight and 3 ft of SCH 40 1/2" PVC pipe
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- GNU General Public License v3.0
Very sturdy tape holder using 3 ft of SCH 40 1/2" PVC pipe cut into 18 in. segments, a U.S. GENERAL 18 in. Magnetic Tool Holder from Harbor Freight, two M4 nuts and bolts, and a bit of CA glue. Attached as shown the rack can be removed fairly easily lifting up but requires significant effort to separate from the toolbox pushing down.
I printed these out of ABS using a 0.4 mm nozzle with 3 perimeters and 15% infill. PETG should also work fine, and I expect PLA could work as well since you would run out of space filling the rack with tape well before straining the print.
Link to the magnetic bar: