Elf Ranger with Longbow – Fantasy Miniature (32 mm & 75 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hooded elf ranger with a longbow, drawing an arrow. Tabletop and display scale, one part, resin-ready.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
A hooded elf ranger in a long cloak and fitted leather armor, holding her longbow and reaching for an arrow from her quiver. A ready-to-play hero for your party.
Included files: elf_ranger_32mm.stl (tabletop version, 36 mm tall) and elf_ranger_75mm.stl (display and painting version, 84 mm tall). Single solid part, no assembly needed. Checked for printing: watertight, manifold, one body.
This model was created with AI assistance (Meshy) and then cleaned up, scaled and prepared for printing by me. It is an original design and not based on any game or film license.
Printing: designed for resin (MSLA), not test-printed yet. Resin: 0.05 mm layers, tilt 30-45 degrees, light supports under the bow, the arrow and the cloak. FDM: use the 75 mm version with 0.12 mm layers and tree supports. Note: the bowstring and the arrow are very thin, especially in the 32 mm version (well below 0.8 mm). Print it in resin, handle it with care, or replace the string with a thin wire after printing.