Treasure Chest Monster – Fantasy Miniature (32 mm & 75 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A treasure chest monster with sharp teeth and a long tongue. Tabletop and display scale, one part, resin-ready.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
A treasure chest that is not what it seems: the lid opens like jaws full of sharp teeth and a long tongue reaches out, standing on short clawed legs. A classic dungeon trap for your table.
Included files: treasure_chest_monster_32mm.stl (tabletop version, 25 mm tall) and treasure_chest_monster_75mm.stl (display and painting version, 59 mm tall). Single solid part, no assembly needed. Checked for printing: watertight, manifold, one body.
This model was created with AI assistance (Meshy) and then cleaned up, scaled and prepared for printing by me. It is an original design and not based on any game or film license.
Printing: designed for resin (MSLA), not test-printed yet. Resin: 0.05 mm layers, tilt 30-45 degrees, light supports under the lid, the teeth and the tongue. FDM: use the 75 mm version with 0.12 mm layers and tree supports. Note: in the 32 mm version the teeth and the tip of the tongue are thinner than 0.8 mm, so print it in resin and handle it with care.