DJI cap mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for DJI cameras to be sewn to a cap or anywhere else.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Open Community License v1.1
I wanted to capture moments from my fishing trips, I determined that the best location of camera is on a head, but i always wear a cap when fishing, so regular headband mounts wouldn't work for me.
Placing the camera on the brim makes the cap front heavy, and really tiring to wear, so i created mount that you sew to the front of the cap, above the brim.
It prints in pieces, to prevent weaknes of layer adhesion. Just glue it (or not, it will work as it gets presed from the back by the cap. But i recomend gluing it...)
For the assembly you need glue for filament that you used, M5 nut (preferably stainless), needle and thread (I used flytiing thread - 75 denier and UV resin to make it super strong)
