1 / 2
Rococo Cat Photo Frame 6x4" - Ornate, with a Hidden Mouse — zdjęcie 1
1 / 2

Rococo Cat Photo Frame 6x4" - Ornate, with a Hidden Mouse

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ornate gilt-style 6x4" frame with a cat crest, cat’s-eye corners, tabby-tail scrolls and a hidden mouse. Prints face-up,

Ocena
0 / 5
Polubienia
3
Pobrania
3
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Share Alike

An over-the-top rococo frame for an over-the-top cat. Dry-brush it gold or silver and it looks like it came from an antique shop.

Details to spot:

  • A cat mask crest with whiskers, a collar bell, with its ears breaking the top edge

  • Cat’s-eye gems set in pearl-ringed quatrefoils at each corner

  • Tabby-tail scrolls and a vine with toe-bean berries

  • Egg-and-dart, bead-and-reel and rope-twist mouldings

  • Acanthus sprays breaking out of the outline

  • A tiny mouse hiding somewhere along the top. Can you find it?

Fits: 6x4" (102 x 152 mm) portrait photo, no glass
Size: 162 x 214 x 10 mm. Needs 215 mm in one direction. It fits 220x220 beds and Bambu X1/P1/A1, and Prusa MK4 if you rotate it 90°. It’s too big for A1 mini or Prusa Mini.

Included:

  • The frame (one piece)

  • A backing plate and 4 turn buttons

You’ll need: 4 x M2 x 5 mm screws for the turn buttons, plus a nail or screw for the keyhole hanger on the back.

Print settings (tested on a Flashforge Adventurer 5M Pro):

  • PLA, 0.4 mm nozzle, 0.2 mm layers

  • Face-up, flat back on the bed, no supports

  • 2 walls, 3 top and 3 bottom layers, 15% rectilinear infill

  • Retraction travel distance threshold: 5 mm. Retraction length: 0.8 mm or less

  • Nozzle about 10°C cooler than usual. If your printer has an enclosure, open it

  • About 55 g and 2-2.5 hours

Why the fussy settings? All that fine detail means thousands of tiny hops between bumps. With default settings the extruder can chew through the filament halfway up and carry on printing air. These settings fix that. Please avoid lightning infill, which adds even more hops.

Assembly:

  1. Put the photo face-down in the recess.

  2. Lay the backing plate on top.

  3. Screw on the turn buttons and twist them over the plate.

  4. Hang it on the keyhole.

Finishing (as pictured): print in dark brown or black PLA, then dry-brush metallic gold acrylic. Wipe almost all the paint off the brush and skim it across the high points. For extra age, add a dark wash in the recesses, then seal with matte varnish.

Print settings fields

  • Printer: Flashforge Adventurer 5M Pro

  • Rafts: No

  • Supports: No

  • Resolution: 0.2 mm

  • Infill: 15%

  • Filament: PLA

Tagi