Rococo Cat Photo Frame 6x4" - Ornate, with a Hidden Mouse
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ornate gilt-style 6x4" frame with a cat crest, cat’s-eye corners, tabby-tail scrolls and a hidden mouse. Prints face-up,
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 3
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
An over-the-top rococo frame for an over-the-top cat. Dry-brush it gold or silver and it looks like it came from an antique shop.
Details to spot:
A cat mask crest with whiskers, a collar bell, with its ears breaking the top edge
Cat’s-eye gems set in pearl-ringed quatrefoils at each corner
Tabby-tail scrolls and a vine with toe-bean berries
Egg-and-dart, bead-and-reel and rope-twist mouldings
Acanthus sprays breaking out of the outline
A tiny mouse hiding somewhere along the top. Can you find it?
Fits: 6x4" (102 x 152 mm) portrait photo, no glass
Size: 162 x 214 x 10 mm. Needs 215 mm in one direction. It fits 220x220 beds and Bambu X1/P1/A1, and Prusa MK4 if you rotate it 90°. It’s too big for A1 mini or Prusa Mini.
Included:
The frame (one piece)
A backing plate and 4 turn buttons
You’ll need: 4 x M2 x 5 mm screws for the turn buttons, plus a nail or screw for the keyhole hanger on the back.
Print settings (tested on a Flashforge Adventurer 5M Pro):
PLA, 0.4 mm nozzle, 0.2 mm layers
Face-up, flat back on the bed, no supports
2 walls, 3 top and 3 bottom layers, 15% rectilinear infill
Retraction travel distance threshold: 5 mm. Retraction length: 0.8 mm or less
Nozzle about 10°C cooler than usual. If your printer has an enclosure, open it
About 55 g and 2-2.5 hours
Why the fussy settings? All that fine detail means thousands of tiny hops between bumps. With default settings the extruder can chew through the filament halfway up and carry on printing air. These settings fix that. Please avoid lightning infill, which adds even more hops.
Assembly:
Put the photo face-down in the recess.
Lay the backing plate on top.
Screw on the turn buttons and twist them over the plate.
Hang it on the keyhole.
Finishing (as pictured): print in dark brown or black PLA, then dry-brush metallic gold acrylic. Wipe almost all the paint off the brush and skim it across the high points. For extra age, add a dark wash in the recesses, then seal with matte varnish.
Print settings fields
Printer: Flashforge Adventurer 5M Pro
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 15%
Filament: PLA