121 models
Simple 20mm photo frame for 6x4 photo! As this will be printed with the front face down, you can set top thickness to 0 to save some filament!
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
Printing costs per rack ~1.60 Euro.
Print approx. €7.14–€8.73 excl. taxPreliminary estimate for one variant
The .223 Remington is a rifle cartridge developed in 1957 as a hunting bullet. A military version, the M193, was used by the United States Army in the M16 rifle. The 5.56x45mm NATO was also developed from the .223 Remington. Category:…
Updated Model - See changelog Change log: Made the infill MUCH lighter on filament consumption, will also print much quicker; Improved chamfer dimension to make it easier to separate both parts; Made snapping tolerance better and shaped…
Collection of screws (ISO 4762 / DIN 912) including : M6x 6, 8, 12, 16, 20, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
There are a lot of speed loaders for AR15 magazines on different sites and I have tested all of them. Unfortunately none of them fulfilled exactly what I wanted. My requirements were: -easy insertion of ammunition without feeding…
Belt buckle quick release, Print with 80% infill for more strength in the locking tabs.
A 100-round waterproof rugged ammo box to store/transport your 5.56x45 ammunition.
I grew tired of having my wobble sockets roll around in my tool box, so I created a 3x6 gridfinity tray to keep them in place. The tray is tall enough to keep pieces securely in place on a tool cart, but shallow enough to fit in the 35mm…
Measures 10.7cm tall and has a thickness of 0.8mm
Chevrolet Spark 2011-2015 rear speaker adapter. 6x4 to 6.5". ABS\PETG. Category: Audio
I built my first RC plane (the Flite Test Tiny Tutor) and ordered 4 props. After building the plane, I very quickly crashed 4 times and broke all the props. In an effort to keep practicing, I designed these props so that I could keep…
Material PLA, 15% infill, without supports
EDIT 07/20/2025: Added a Chamfer to the holes in the block (Because chamfers are what separate us from the animals) Reloading Block for .223 Rem./5.56x45 NATO rounds. The Block holds 50 shell casings at 0.5" (12.7mm) deep. The holes are…
The product: https://www.harborfreight.com/12-in-drive-impact-socket-extension-set-4-piece-67972.html Fits perfectly, a little bit of wiggle room, both trays are stack-able. Includes cutouts to grab them. Not sure about fitment with other…
good for 24 x 18650 cells in 6s4p, or 4s6p, or just 24s configs small bump in rings to hold cells securely, print 2 racks for top/bottom of cell pack
I needed a scope throw lever that was thinner than others out there in order to fit with how my scope was mounted onto the rail. This thing is about 6mm wide, just wide enough for the M3 nut to nest into the side. At 6mm thick, this isn't…
Invisible photo frame Minimalistic stand Easy and fast to print
5.56X45mm stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
this is a 6x4 photo frame for canon CP printer and you cane frame with any 6x4 photo You can use pla , pla+ , abs and petg for printing and u need use tree support in the slicer
Simple 10mm photo frame for 6x4 photo! As this will be printed with the front face down, you can set top thickness to 0 to save some filament!
I made this to hold 6x4 fan fold postage labels and the top bar also holds rolls of labels. Printing can be done with 15% infill. I use a textured PEI bed so have all the external walls face down so no support is needed. I was lazy and…
Box for ammo cal. 5.56x45 (SWISS), can hold 50 ammunition. Very useful for sport shooting 300m. For this Box you must add 10 parallel pins (ISO 2338) Ø4 h8x18 (if you can't find it, you can cut a bar of any matirial Ø4, or print 8…
General: A simple snapcap/dummy round/design aid for 5.56X45mm Nato Why I designed this: I'm designing a speed loader for pmags, and this was a first step in getting that tuned in. Printing notes: Layer height: .15 or finer is ideal…
Not only one prong, but two for billboard-style labeling ; ) Measures 10cm tall and has a thickness of 0.8mm
I really like RODSGEAR's 35mm film holder but I wanted a similar version for 6x4.5 frames on 120 film so I made this. I tried to keep it similar to the original design but with a few small changes that improved it for me. A few key…
Specs: 43.8mm inside diameter on eyepiece 51.8mm inside diameter to cover the 44mm lense Can probably be scaled to any scope size
UPDATE: Added v2 STL which includes slightly tweaked dimensions within the negative channel and improved magnet positioning to reduce the force required to lift the top plate New channel dimensions reduce side-to-side play from the front…
For fixing, I used 3x15 screws. I also made a "v6a" version that was recessed in the screw because I was afraid that the part would break when tightening, but the "v4a" version printed vertically works very well, I didn’t break it when…
5.56X45mm Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…
Pin to assemble shelves or other (printed) equipment to IVAR The pin is designed with 6.2mm (metal pins are 5.9mm) to have a bit tighter fit. I printed without brim on the smooth PEI sheet which worked out just fine.
A simple tape measure spool with a ball bearing (8x16x4) for smooth operation. My tape measure is 1.5m by 15mm. The slot to stick the end of the tape measure into is 1.2mm thick.
Saw a reddit post about wanting a model with striations for their teacher. Grabbed a model from gradCAD, quick sketch, sweep and you have some striations. The punched primer is also tapered and at an angle but due to it's size, it is not…
This is a Macropad that I recently designed. It's powered by the famous ZMK firmware and it's wireless. You can charge it through a USB-C port. There is a print-in-place slide switch to turn it off. Parts needed: 4x SHCS/BHCS M2x8 or…
The boxes were printed in PLA with normal settings (.4 nozzle, .2 mm layer). The plain box was printed in transparent PLA with Gyroid infill. The pillars box may need some support or not, depending on your printer. Decide at own risk ;)…
Version two of my CPU puzzle, bigger and harder to solve. Took the concept from the original CPU puzzle and added two more pegs. Unlike the smaller puzzle the pattern for this one is slightly more random. Styled to look like an Intel CPU…
Keep your filament dry and secure! This is a simple end cap designed specifically for 6x4 PTFE tubes (6mm Outer Diameter, 4mm Inner Diameter). I originally designed this for my Polydryer setup to solve two common issues at once: Moisture…
Beveled edges provide for a nice fully exposed surface that is difficult for roving miscreants to remove and deflects water/wind. Internal standoffs support the panel at its optimal height. Side notch allows for easy wiring. Watch the…
Designed to make a IKEA KALLAX complete, because i lost the original once. :-) Thanks, Enjoy!
I've loved shooting my Bronica with a 6x4.5 back but found composing in square and mentally cutting out the cropped imagI've loved shooting my Bronica with a 6x4.5 back but found composing in square and mentally cutting out the cropped…
This is an AK version of my 5.56 AR-15 magazine loader. I used WBP magazines as a sizing guide. The plunger should fit in perfectly with no extra room when exactly 30 rounds are in the loader.
Reloading tray for the 6x47 Lapua. Print using your choice of material and the appropriate settings. Use supports for the handle areas. With such a large bed contact area, corner lifting may occur as a result of cooling. If this occurs, a…
A 6x4.5 mask for the Lomograhpy Lubitel 166+ viewfinder. I'm not sure about the compatibility with older Lubitel models. If you have the older model, feel free to try and share the result with other. I created it very thin (3-4 layers)…
Customized version of https://www.thingiverse.com/thing:57281 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=57281 Instructions Using the following options: _part = top _batteryDiameter = 14.9…
De Vere 6x4.5 negative holder Category: Other
Chisel tray for Zack Freedman's Gridfinity system. The tray holds 4 chisels, each with the following dimensions: ¼" ½" ¾" 1" The chisel manufacturer for my chisels is Marples and the model number is MS500 (I think) for the set of 4…
6x1 through 6x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our…
This is a picture frame that says family on the front. It can be printed multicolor or single color. It is 6x4 inches. When printing, use normal supports for easiest removal.
Knurled volume knobs made for D Shafts sized 6mm x 4.5mm. The hole is 5mm deep and the walls around it are 1.6mm.
Palette mit Rastermaßen 6x4, kompatibel mit Lego Duplo
This design is pretty specific, I know. It's a plastic replacement part for keys with shaft size 16x4x2,5 mm. If you need any other shaft size, please let me know! Printed 2 parts with my SLA printer and glued them together with Loctite…
Little maze design cup coaster , 86x4mm
Lightweight photo/postcard frame with bracket that works portrait or landscape. It has two holes if you want to screw or nail it up, or you can just use a mounting strip. No need for any supports. The snap-fit front holds the backing in…
Nespresso Capsule holder stand 6x4pcs v2 for easier print Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 280 Infill: 20 Filament: PolyMaker PLA Category: Kitchen & Dining
a parralax wheel for the FALKE 4-16x44
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 File names are shared across the entire project family. A part with a given name from one project will fit as a part with…
Simple X-shaped design so that corners of the photo can be glued as well. Designed in openSCAD, so completely customizable. NOTE - When slicing, add a pause at the right height so that you can drop in your magnet. My magnet dimensions can…
Hello Tribe, After releasing that speciality project box, I thought it would be great to release a very basic one also. the screw is a m4x15 if you were wondering. Visit us on Patreon.com/thefreeheathenworkshop check out our book…
I designed a number of connectors with to make decorative fencing, railings and ladders etc. for use with the fischertechnik construction system from 6 mm hose. I'm pretty sure there are many other applications for your own projects. Some…
Rolleiflex SL66 viewfinder mask for6 by 4.5 film backs. Hope it helps with composition.
The Wurkkos HD02 is one of my favorite lights of 2025 but one thing that I miss is the ability to twist the wings to illuminate away from a magnetic surface. With this clip the lamp can be magnetically attached overhead so that the…
Just a simple vial holder for 24 (6x4) HPLC 2mL vials with holes a) to enable sonication b) to save filament and reduce printing time.
Convert your standard VALOI easy120 6x9 film holder into a versatile multi-format system! These drop-in masks allow you to seamlessly shoot and scan 6x7 and 6x4.5 medium format film without buying entirely separate holders. They are…
The item is printed on its back and requires no supports. The tab to the side at the front is used to label what is on each shelf.
The john deere gator 6x4 is good for farming seens it needs supports to work and if you have any issues with it put them in the comments and I will try to fix it and if you download the print please frow a comment because I want to know…
Cap for 6x4cm (60x40mm) fence pole For weather resistance recommended to print from ASA (or PETG). To save material print with 2-3 walls and low infill ≤10% (sorry for the picture taken with a potato)
PETG or PLA. PETG is best for outdoor. Print model with side down.
Resize Slot nut to fit not the profile unless wanted longer, do what you can to fit otherwise use as cable management, please. Thanks
Customized version of https://www.thingiverse.com/thing:57281 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=57281 Instructions Using the following options: _part = bottom _batteryDiameter = 14.9…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 File names are shared across the entire project family. A part with a given name from one project will fit as a part with…
This is an R8 collet tray. Tapered holes hold collets precisely. The top/bottom printed separately and press fit. Models for both gridfinity and smooth bottomed bases included. Parts have been designed with slopes and chamfered to be…
This tiny object enables you to fix the typical 6x4mm 2 wire lamp cables to a panel ceiling without the need for making holes or using glue. The flat end of the clip slides into the groove of the panels and is held there by the spring of…
Nespresso Capsule holder stand 6x4pcs v2 for easier print Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 280 Infill: 20 Filament: PolyMaker PLA Category: Kitchen & Dining
Print the parts, complete and insert photo. Print without support is recomended.
Anschlussgewinde M36x4 für Elu MHB90 Bandschleifmaschine mit Festool-Anschlussmuffe oder angepassten superschnellen Schnellwechselsystem für Staubsaugeranschlüsse mit 2x 10x2 Magnete von Peter H Danke an Peter H…
An organizer for my current probe
Another gridfinity project. This one is for my needle-nose pliers. I had to split it in the slicer as I only have a K1 but the model is for a continuous print. Simply to use and is 4u height in the gridfinity world.
Holds TWO angle finders, plus batteries I used a 1x6x4 unit high filled box and then subtracted the 3d model of of the angle finder by cogspace. I added a 0.01" outline around the projected shape. Then added a central storage recess for…
Mit kreppband passe ich es zu den Jeweiligen spulen an.
10 inch rack-mountable holder for a 16x2 LCD i2c backpack display and a small protoboard to drive it
obroučka na měřák 31,6x40,9 pro diabetiky
A simple, tidy photo frame for standard 6 x 4 inch (15 x 10 cm) prints. Lay the photo face-down in the frame, press the back panel in until it clicks under the four catches, and push the stand into its socket. It leans back 15 degrees,…
An over-the-top rococo frame for an over-the-top cat. Dry-brush it gold or silver and it looks like it came from an antique shop. Details to spot: A cat mask crest with whiskers, a collar bell, with its ears breaking the top edge…
A remix of KeepTheBOX's ESP32 Camera Mod for CORE One, which follows the Buddy3D camera's three-magnet corner mount. All credit for the design goes there, and like the original this remix is CC BY-NC-SA 4.0. It's built for a Seeed XIAO…
I designed a number of connectors with to make decorative fencing, railings and ladders etc. for use with the fischertechnik construction system from 6 mm hose. I'm pretty sure there are many other applications for your own projects. Some…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
Lightweight photo/postcard frame with bracket that works portrait or landscape. It has two holes if you want to screw or nail it up, or you can just use a mounting strip. No need for any supports. The snap-fit front holds the backing in…
I really like RODSGEAR's 35mm film holder but I wanted a similar version for 6x4.5 frames on 120 film so I made this. I tried to keep it similar to the original design but with a few small changes that improved it for me. A few key…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 File names are shared across the entire project family. A part with a given name from one project will fit as a part with…
Other projects from overengineered ammo box series: https://www.printables.com/@Zimny_4180406/collections/3128956 File names are shared across the entire project family. A part with a given name from one project will fit as a part with…
Just a simple vial holder for 24 (6x4) HPLC 2mL vials with holes a) to enable sonication b) to save filament and reduce printing time.
This is an R8 collet tray. Tapered holes hold collets precisely. The top/bottom printed separately and press fit. Models for both gridfinity and smooth bottomed bases included. Parts have been designed with slopes and chamfered to be…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
