Replacement bridge deck for Step2 Fill and Dump mine-cart table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recharge the play value in your old mine cart toy from Step2 - replacement bridge decks make the cars go again
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
I noticed that the fill and dump table wasn't getting much play time in the preschool. So I replaced the missing bridge decks that let the little mine carts drive around. Suddenly the kids are playing with it again. A little attention and the play-value of the toy is restored.
Printing instructions
USE PETG (PLA degrades when exposed to water, and is quite brittle).
Settings - 0.25 layer height (speedier, thicker layers), 4 perimeters (for strength), 1 extra top and bottom layer (for stiffness) and 15% grid infill.
It's an easy print, no supports are required. Just bed it flat side down. I printed them in bright colors to match the original color scheme of the toy. I didn't tell the kids it was fixed up - they just started playing with it again. Now it needs a good cleaning.