Pantheon SuperDuperSonic Longboard Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts via the rear truck mount holes on a Pantheon SuperDuperSonic, creates a not-quite-level mounting surface
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Creates a slightly up-angled and right-offset mounting surface for attaching cameras to the rear truck mount point on a Pantheon SuperDuperSonic. The mounting surface includes on 1/4" hole suitable for standard tripod screws.
I wanted something that would capture a view of my footing + the whole board, instead of a standard front mount that just shows the road ahead.
I intended this to exactly match the angle of the superdupersonic but the result is not quite level, i think it works out ok because you don't want to be looking at too much of the ground anyway.
I offset it so that the camera view catches your footing, but also gives a decent view ahead (depending on your camera's FOV of course). There is some risk of kicking the camera/mount when pushing regular foot, but if you're hitting it you're probably at risk of kicking the wheel too.
Requires support to print in the normal orientation