Pantheon SuperDuperSonic Longboard Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts via the rear truck mount holes on a Pantheon SuperDuperSonic, creates a not-quite-level mounting surface
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
Creates a slightly up-angled and right-offset mounting surface for attaching cameras to the rear truck mount point on a Pantheon SuperDuperSonic. The mounting surface includes on 1/4" hole suitable for standard tripod screws.
I wanted something that would capture a view of my footing + the whole board, instead of a standard front mount that just shows the road ahead.
I intended this to exactly match the angle of the superdupersonic but the result is not quite level, i think it works out ok because you don't want to be looking at too much of the ground anyway.
I offset it so that the camera view catches your footing, but also gives a decent view ahead (depending on your camera's FOV of course). There is some risk of kicking the camera/mount when pushing regular foot, but if you're hitting it you're probably at risk of kicking the wheel too.
Requires support to print in the normal orientation