Lens hood for Sigma Contemporary 45mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple non-reversible lens hood design for Sigma C 45mm full-frame lens
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple lens hood for Sigma C 45mm f/2.8.
The round one is aimed at a similar length as the original Sigma lens hood (I do not have it so I could not take measurements), while the other model is designed to resemble traditional lens hoods for wider angle lenses more closely.
Note that it allows for a significantly wider FOV than the lens would need, and in fact could be a tube with full length without issues - This one is style over function.
Print without supports, 2 perimeters, infill does not matter. Slow down on overhangs and increase fan speed to the max, otherwise the snap hooks will fuse shut with the body of the lens hood. Even with good overhang settings you will have to gently break them free after printing.