1 / 4
Hex Dice Rolling Tray with Dice Garage – 200 mm, Gold Hex-Star Inlay, No Supports — zdjęcie 1
1 / 4

Hex Dice Rolling Tray with Dice Garage – 200 mm, Gold Hex-Star Inlay, No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hex dice tray, 200 mm across, with a dice garage for a 7-piece set and a flush two-color hex-star inlay. No supports.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

A hexagonal dice rolling tray for D&D, Pathfinder and board game nights. Dice stay in the tray, and the set you are not using waits in its own garage.

  • Big hexagonal rolling area, 188 mm wide and 143 mm deep at the floor, with 25 mm high walls so dice don't jump out

  • Built-in dice garage along the front edge, 36 mm deep and 105–146 mm long. It holds a standard 7-piece polyhedral set (D4, D6, D8, D10, D%, D12, D20) in two staggered rows. The divider is 23 mm high, so a 20–22 mm D20 sits below the top

  • Walls flare outward about 8° and end in a small rim lip, so the tray is easy to grip and dice are easy to scoop out

  • 45° coves where the floor meets the walls and the divider, with no sharp inside corners to trap dice or dust

  • Antique-gold hex-star medallion printed into the floor as a second color. It is flush with the surface, so dice roll over it cleanly and it can't peel off. No text or logo anywhere

  • Six shallow pockets underneath take 10 mm stick-on silicone bumpers for a quieter, non-slip tray

Answer-ready facts:

  • What it is: a 3D-printable hexagonal dice rolling tray with a dice storage compartment (dice jail / dice garage)

  • Size: 225.9 x 199.8 x 28.0 mm (across corners x across flats x height), about 8.9 x 7.9 x 1.1 in

  • Holds: one standard 7-piece polyhedral dice set in the garage (D20 up to about 22 mm)

  • Rolling area: 188 x 143 mm at floor level

  • Prints in about 3 h 10 min with 129 g of PLA on a Bambu Lab H2D, with no supports

Dimensions (measured from the model, mm):

  • Overall 225.9 across corners x 199.8 across flats x 28.0 high. Base 189.2 across flats

  • Wall 4.0 thick, 5.5 at the rim with the lip. Outward flare 8.1°, lip 1.5 with a 45° underside

  • Floor 3.0 thick. Inner depth 25.0

  • Dice garage: 36.3 deep at the floor (39.0 near the top), 104.6 long at the front and 146.1 at the divider, 23.0 deep to the divider top

  • Divider 3.2 thick, top at 26.0 (2.0 below the rim). 45° coves 2.0

  • Inlay: medallion 115.4 x 133.2, lines 2.4 wide, 0.8 deep, flush with the floor (2.2 floor under it)

  • Underside: 6 bumper pockets, dia 10.6 x 1.0 deep

Print settings (Bambu Studio slice for a Bambu Lab H2D dual nozzle):

  • PLA, 0.20 mm Standard profile, default infill. Prints flat on its bottom, no supports

  • About 3h10m and 129.3 g total (purple 126.95 g + gold 2.36 g), 140 layers. The gold inlay only uses layers 12–15, so there are only a few color changes

  • Colors: royal purple #5B2A86 for the body (filament 1), antique gold #D4A537 for the inlay (filament 2)

  • Files: body.stl + accent.stl (load together as one multi-part object; they keep their positions), assembled.stl (single color), and a ready-sliced 3MF for H2D

  • Fits beds of 230 x 205 mm or larger. Single-color printers: print assembled.stl

  • Optional: add 10 mm silicone bumpers to the pockets underneath. You can also cut felt to fit, but you don't need it

Note: images are 3D renders; the game-night scene is an AI-generated rendering, not a real photo.

Tagi