Hex Dice Rolling Tray with Dice Garage – 200 mm, Gold Hex-Star Inlay, No Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hex dice tray, 200 mm across, with a dice garage for a 7-piece set and a flush two-color hex-star inlay. No supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Standard Digital File License
A hexagonal dice rolling tray for D&D, Pathfinder and board game nights. Dice stay in the tray, and the set you are not using waits in its own garage.
Big hexagonal rolling area, 188 mm wide and 143 mm deep at the floor, with 25 mm high walls so dice don't jump out
Built-in dice garage along the front edge, 36 mm deep and 105–146 mm long. It holds a standard 7-piece polyhedral set (D4, D6, D8, D10, D%, D12, D20) in two staggered rows. The divider is 23 mm high, so a 20–22 mm D20 sits below the top
Walls flare outward about 8° and end in a small rim lip, so the tray is easy to grip and dice are easy to scoop out
45° coves where the floor meets the walls and the divider, with no sharp inside corners to trap dice or dust
Antique-gold hex-star medallion printed into the floor as a second color. It is flush with the surface, so dice roll over it cleanly and it can't peel off. No text or logo anywhere
Six shallow pockets underneath take 10 mm stick-on silicone bumpers for a quieter, non-slip tray
Answer-ready facts:
What it is: a 3D-printable hexagonal dice rolling tray with a dice storage compartment (dice jail / dice garage)
Size: 225.9 x 199.8 x 28.0 mm (across corners x across flats x height), about 8.9 x 7.9 x 1.1 in
Holds: one standard 7-piece polyhedral dice set in the garage (D20 up to about 22 mm)
Rolling area: 188 x 143 mm at floor level
Prints in about 3 h 10 min with 129 g of PLA on a Bambu Lab H2D, with no supports
Dimensions (measured from the model, mm):
Overall 225.9 across corners x 199.8 across flats x 28.0 high. Base 189.2 across flats
Wall 4.0 thick, 5.5 at the rim with the lip. Outward flare 8.1°, lip 1.5 with a 45° underside
Floor 3.0 thick. Inner depth 25.0
Dice garage: 36.3 deep at the floor (39.0 near the top), 104.6 long at the front and 146.1 at the divider, 23.0 deep to the divider top
Divider 3.2 thick, top at 26.0 (2.0 below the rim). 45° coves 2.0
Inlay: medallion 115.4 x 133.2, lines 2.4 wide, 0.8 deep, flush with the floor (2.2 floor under it)
Underside: 6 bumper pockets, dia 10.6 x 1.0 deep
Print settings (Bambu Studio slice for a Bambu Lab H2D dual nozzle):
PLA, 0.20 mm Standard profile, default infill. Prints flat on its bottom, no supports
About 3h10m and 129.3 g total (purple 126.95 g + gold 2.36 g), 140 layers. The gold inlay only uses layers 12–15, so there are only a few color changes
Colors: royal purple #5B2A86 for the body (filament 1), antique gold #D4A537 for the inlay (filament 2)
Files: body.stl + accent.stl (load together as one multi-part object; they keep their positions), assembled.stl (single color), and a ready-sliced 3MF for H2D
Fits beds of 230 x 205 mm or larger. Single-color printers: print assembled.stl
Optional: add 10 mm silicone bumpers to the pockets underneath. You can also cut felt to fit, but you don't need it
Note: images are 3D renders; the game-night scene is an AI-generated rendering, not a real photo.