Budgerigar Figure, Multicolor 3D Printed Parakeet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This budgerigar figure is printed in multiple colors, with a yellow face, green body, and blue tail.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
This budgerigar figure is printed in multiple colors, with a yellow face, green body, and blue tail. The wing markings, cheek spots, and feather texture are all printed in detail, so it looks like a small real bird perched on its stand. It fits in the palm of a hand and to be honest, it is quite delicate.
I made a poor decision to use brown matte filament, excatly where strength was needed the most. The slicer also conspired to add random yellow and further weakened the branch where the little one resides on (that has been fixed)
When removing supports, I broke one but was able to glue it with a drop of glue. So use basic filament there.
Another thing to note, there was a wrinkle on the bottom of the base which I only noticed after I printed it. Fixing it in blender would mean repainting the model… that is not going to happen, so just pull the model a bit down into the build plate if you are editing the 3mf, and check that the first layer looks good.
I also added a structural reinforcement version, a mirrored version and the original version I printed.