1 / 7
Quick Release Cymbal Wing Nut (M8 & M6) — zdjęcie 1
1 / 7

Quick Release Cymbal Wing Nut (M8 & M6)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No more spinning wing nuts off at teardown. Flip the wings down and it slides straight off. No hardware needed.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Standard Digital File License

Store-bought quick release wing nuts are about $20–30 each. Buy this once and print one for every stand.

  • Both wings up: locked 

  • One wing down: spin to adjust

  • Both wings down: slides on and off

I use the M8 no sleeve version on my kit. Played on it a lot with no issues and it comes off easy. One thing I’ve run into with the Pearl ones is the wings sometimes fly open, so I made the hinge on these a bit thicker and they stay put.

Versions

  • M8 or M6 (M6 is not 1/4-20)

  • No sleeve uses your stand's sleeve, the sleeve version has one built in

  • I've only tested the M8 no sleeve, the others are the same design

Print

  • Printed on a Prusa CORE One L+ and an MK4S

  • PLA or PETG, 0.15 mm layers, 4 walls, 40% infill

  • Organic supports for PETG

  • PLA needed no sanding. PETG needed a little.

  • Print as oriented

  • One half nut A and one B, they only work as a pair

  • The plate files have all 7 parts

Assembly

 M8_full-plate_no-sleeve.stl is likely the file you want to print, if you already have sleeves. Most modern stands are size M8.

  1. Put the half nut the same way up it printed. Fold the wing down and drop it on, round bits into the side slots.

  2. Slide both into the body until the holes line up.

  3. Push the pin in from the round hole side into the hex hole.

  4. Same for the other side.

If the wings are too tight, sand the legs a bit.

Tagi