1 / 4
TPU Vacuum bag adaptor for Jabykare Electric Air Pump for Vacuum Storage Bags (Amazon) — zdjęcie 1
1 / 4

TPU Vacuum bag adaptor for Jabykare Electric Air Pump for Vacuum Storage Bags (Amazon)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connector for the cheap Jabykare mains-powered vac pump to fit standard vac bags (like creality bags with the blue cnxn

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

The Jabykare Electric Air Pump for Vacuum Storage Bags - amazon ASIN B0C9QSYC15 - is an excellent little mains-powered vac pump, but it doesn't come with any connectors, and the nozzle is hard plastic. So it does not form a good seal with the connectors on vac bags. This little TPU adaptor slips onto the pump, and fits the standard blue connectors (~25mm OD) on many vacuum bags - like those that come with creality's vacuum kit.

The blue connectors on the bags are threaded, but the TPU is flexible enough to just slip over it.

I printed this on my prushit$a XL with Overture HD TPU - it's a fraction of the price of pru$a's TPU, has an XL profile, and prints without any adjustment to the toolheads. Make sure it's as dry as a nun's nasty before printing.

Settings:

Layer height

0.20 mm

Perimeters

6

Infill

100%, rectilinear 

Top/bottom layers

Profile default

Amazon link (non-affiliate - I don't need 0.0003c from Jeff FFS): https://www.amazon.com.au/dp/B0C9QSYC15

Tagi