TPU Vacuum bag adaptor for Jabykare Electric Air Pump for Vacuum Storage Bags (Amazon)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connector for the cheap Jabykare mains-powered vac pump to fit standard vac bags (like creality bags with the blue cnxn
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
The Jabykare Electric Air Pump for Vacuum Storage Bags - amazon ASIN B0C9QSYC15 - is an excellent little mains-powered vac pump, but it doesn't come with any connectors, and the nozzle is hard plastic. So it does not form a good seal with the connectors on vac bags. This little TPU adaptor slips onto the pump, and fits the standard blue connectors (~25mm OD) on many vacuum bags - like those that come with creality's vacuum kit.
The blue connectors on the bags are threaded, but the TPU is flexible enough to just slip over it.
I printed this on my prushit$a XL with Overture HD TPU - it's a fraction of the price of pru$a's TPU, has an XL profile, and prints without any adjustment to the toolheads. Make sure it's as dry as a nun's nasty before printing.
Settings:
Layer height | 0.20 mm |
Perimeters | 6 |
Infill | 100%, rectilinear |
Top/bottom layers | Profile default |
Amazon link (non-affiliate - I don't need 0.0003c from Jeff FFS): https://www.amazon.com.au/dp/B0C9QSYC15