Village Well - Paintable Nativity Scenery | Stonework & Rope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three-part well with hewn stonework, wound rope and a stave bucket. Paintable scenery; physical print untested.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
A small paintable village well for a nativity scene or diorama. Three separate pieces: masonry body, timber windlass frame and stave bucket.
DIGITAL MODEL - NOT YET PHYSICALLY PRINTED. Fit, support removal and fine-detail reproduction still need a real print. All pictures are renders of the actual supplied geometry.
DETAILS
44 individually shaped masonry stones with worked edges, an open interior, longitudinal timber grain, beam pegs, bearing plates, eight wound rope turns and a ten-stave bucket with two binding bands. The windlass and crank are static decorative features.
SIZE & FILES
Assembled: 72.5 x 70 x 75.4 mm.
Masonry: 70 x 70 x 31 mm. Frame in supplied print orientation: 68.5 x 49 x 9 mm. Bucket: about 12.41 x 12.41 x 14.90 mm.
Three STL files, an arranged geometry-only 180 x 180 mm 3MF, editable sources, bilingual instructions and a painting/assembly PDF. No printer presets are embedded. For smaller plates, load the STL parts separately and arrange them for your machine.
PRINT & ASSEMBLE
Use your own machine and filament profile. A 0.4 mm nozzle and 0.16 mm layers are the digital-check starting point. Inspect the slicer preview. The frame needs supports beneath its back; keep the engraved front facing up. Brim and support removal require judgement for your material and machine.
Dry-fit both frame pins before painting. Nominal pin/seat side clearance is 0.2 mm and end clearance 0.4 mm; this does not guarantee fit on every printer. Glue only after checking the fit, with a suitable adhesive. Paint the bucket separately and rest it on the coping as illustrated.
Scale all parts together, then recheck clearances, fine details, supports and plate margins. Start at 100% for a first trial.
PAINTING
The PDF identifies stone, timber, rope, fittings and bucket areas with a suggested palette. The model is supplied without colour.
ITALIANO
Pozzo da dipingere in tre pezzi per presepe e diorami, con muratura lavorata, fune avvolta e secchio a doghe. Non ancora stampato fisicamente. Il telaio richiede supporti sul retro: controlla il percorso con il profilo della tua macchina. Prova gli incastri a secco prima di dipingere e incollare. Per piatti piccoli carica gli STL singolarmente. Scala tutti i pezzi insieme e ricontrolla giochi e dettagli. Guida PDF di montaggio e pittura inclusa.
Original design by MARGRAF ITALY. CC BY 4.0.
Village scenery collection / Raccolta del borgo: Nativity Village Scenery - MARGRAF ITALY. The complete grotto remains in development.