1 / 3
Toyota Alternator B+ Terminal Cover – 82823-26020 — zdjęcie 1
1 / 3

Toyota Alternator B+ Terminal Cover – 82823-26020

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Toyota alternator B+ terminal cover. Print on its back; zip-tie slot included. Use ASA/ABS/nylon, not PLA.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

3D printable replacement for the rubber/plastic cover fitted over the positive B+ terminal on the alternator.

I modelled this from the original terminal cover fitted to my 2008 Toyota HiAce H200 after the original part became cracked and brittle.

Tested vehicle

  • Toyota HiAce 200 Series

  • Model: CBF-TRH216K-KRPEK

  • Engine: 2TR-FE 2.7L petrol

  • 4WD

  • Alternator: Toyota 27060-75371 / Denso 104210-series

  • Original terminal cover: Toyota 82823-26020

It may also fit other Toyota vehicles and Denso alternators that use the same B+ terminal arrangement, but I have only personally tested it on the vehicle above.

Purpose

The cover insulates the exposed positive alternator terminal and nut from accidental contact with surrounding metal parts.

The model also includes a small slot for a zip tie, allowing the cover to be secured to the cable or terminal area if required.

Printing

Print the part on its back, with the large flat outer surface against the build plate. This gives a simple and strong print orientation with minimal support requirements.

Use a heat-resistant filament because this part is located in the engine bay.

Recommended materials:

  • ASA

  • ABS

  • Nylon / PA

  • other suitable high-temperature automotive filament

PLA is not recommended due to engine-bay temperatures.

Installation

Fit the cover over the alternator B+ terminal in the same orientation as the original cover.

A zip tie can be passed through the built-in slot to provide additional retention and help prevent the cover from moving or coming loose.

Notes

This is an independently designed replacement part and is not an original Toyota component.

Please post a Make or comment if you successfully test it on another Toyota model or alternator so the compatibility list can be expanded.

Tagi