SD & microSD Card Holder - Memory Card Organizer, 28 Slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk block for 8 SD and 20 microSD cards, labelled on the front. Prints flat, no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep camera and drone cards in one place: 8 SD slots and 20 microSD slots in a compact desk block, with SD and microSD engraved on the front. The cards stand upright and stick out far enough to grab.
Details: SD slots 24.8 x 2.7 mm, 15 mm deep; microSD slots 11.6 x 1.6 mm, 9 mm deep, in two columns. The slots open only at the top, so it prints flat with no supports. Size 100 x 44 x 20 mm with chamfered edges.
Print settings: 0.2 mm layers, 3 walls, 15% infill, no supports, about 47 g of PLA.
Files: STL and 3MF.
Notes: The memory cards in the images are render props. Images are renders of the actual file. Designed with AI-assisted procedural modeling and checked automatically for printability (watertight mesh, overhang analysis, wall thickness).
Full collection on Cults3D: https://cults3d.com/en/users/aliyalinkilic/3d-models
Paid favourite from the same series, Earbud Case (print in place): https://cults3d.com/en/3d-model/home/earbud-case-print-in-place-hinged-pocket-case-with-cable-spool