1 / 1
Ender3v3 Spool Side Mount Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows rotating the spool arm by 90 degrees to reduce the space taken by the spool
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 1
- Wyświetlenia
- 8
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Allows rotating the spool arm by 90 degrees to reduce the space taken by the spool.
From one side, the connector is connected to the Ender3v3 frame using the original connectors.
To attach the spool holder arm, you need to use 2x M4x12 screws with corresponding nuts, then hang the spool holder arm on them (in the same manner as it is done with the original connectors), and then tighten the nuts.