Capsela Coupler and Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
9-14-21 added a small coupler. Improved profile of parts The coupler and adapter are modeled from the original older…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
9-14-21 added a small coupler. Improved profile of parts
The coupler and adapter are modeled from the original older Capsela set. The tightness of fit varies with older and newer sets. Tightness will also vary with filament material, orientation on the printer bed, with or without supports.
The adapter is not a common fitting so is the reason for making it.
I used Tinkercad and these can be modified if you find they not fit properly. https://www.tinkercad.com/things/4FOBB7cDhdg
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
32
Filament: Hatchbox PLA Clear
Notes:
I use supports on the adapter on the outside with the small end on the bed. Found the fit better.
Category: Construction Toys