1 / 4
TH8S Gear knob with metal parts - Recycled aluminum cans — zdjęcie 1
1 / 4

TH8S Gear knob with metal parts - Recycled aluminum cans

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use recycled aluminum cans to customize this gears knobs!

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Disclaimer

I'm obviously not affiliated with any beverage brand I used it's cans for this project.

Instrutions

Step 1

Choose a can you would like to use, and cut it like in the picture:

Step 2

Use the tracing template to select and mark the drawing in the can you like. The inside of the template is what you will see at the end, But you will need to mar the external contour like in the next picture:

Step 3

Put the picture in the die. Put the die over a rigid surface and press with your hand.

Step 3-2 (Optional)

If you want to add the 7 Speed logo, you use the 7-Seep die after the smoot die. You will need either a C-clamp or a vise to mark the letters enough.

If you use a C-clamp, you will need to press multiple times in different corners of the die, as shown in the next images:

You can paint the numbers. Personally, I am not very good at it:

Step 4

Add the picture to the Knob

Square Knob

It's the same process for the Square knob:

You may need to trim the edges:

Tagi