TH8S Gear knob with metal parts - Recycled aluminum cans
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use recycled aluminum cans to customize this gears knobs!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Disclaimer
I'm obviously not affiliated with any beverage brand I used it's cans for this project.
Instrutions
Step 1
Choose a can you would like to use, and cut it like in the picture:

Step 2
Use the tracing template to select and mark the drawing in the can you like. The inside of the template is what you will see at the end, But you will need to mar the external contour like in the next picture:


Step 3
Put the picture in the die. Put the die over a rigid surface and press with your hand.



Step 3-2 (Optional)
If you want to add the 7 Speed logo, you use the 7-Seep die after the smoot die. You will need either a C-clamp or a vise to mark the letters enough.
If you use a C-clamp, you will need to press multiple times in different corners of the die, as shown in the next images:






You can paint the numbers. Personally, I am not very good at it:

Step 4
Add the picture to the Knob


Square Knob
It's the same process for the Square knob:



You may need to trim the edges:


