Parametric Stackable Gridfinity Baseplate – Fusion File with Adjustable Parameters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable x/y count, stack count and offset. PRINT UPSIDE DOWN. Perfect bed adhesion needed. Cornerbrims are integrated
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Open Community License v1.1
Important: Print upside down and ensure perfect bed adhesion.
If you find this model useful, please leave a like! ♥
This is a fully parametric Gridfinity baseplate designed for printing multiple plates stacked directly on top of each other. You can define the baseplate size, the number of plates in the stack, and the vertical offset between the stacked plates.
All important settings are available in the User Parameters table, so you can adapt the model to your printer, filament, and storage setup without editing the geometry itself.
Print settings
Layer height: 0.24 mm
Elephant foot compensation: 0.00 mm
Infill density: 0%
Wall loops: 2
Material: PETG
Vertical stacking offset: 0.3 mm
Brim ears at the outside corners