Nespresso Essenza Mini Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A base to add extra height to the Nespresso Essenza coffee machine.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
I found I needed some extra height to use certain tall cups with my Nespresso Essenza Mini coffee machine, so I decided to make a little base to stand it on.
This base adds an extra 20mm of height, with a 5mm recess for the machine to sit in.
Tolerances may be a bit tight, with roughly 0.1mm of tolerance either side. As long as your printer is fairly well calibrated it should work.
There is a version split in half with a dovetail joint if the full size model is too large for your printer, the joint has a 0.2mm tolerance for it to be a press fit connection.
Optionally you may attach rubber feet to the bottom in order to give it grip, this is not required for it to function as intended.