Nespresso Essenza Mini Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A base to add extra height to the Nespresso Essenza coffee machine.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
I found I needed some extra height to use certain tall cups with my Nespresso Essenza Mini coffee machine, so I decided to make a little base to stand it on.
This base adds an extra 20mm of height, with a 5mm recess for the machine to sit in.
Tolerances may be a bit tight, with roughly 0.1mm of tolerance either side. As long as your printer is fairly well calibrated it should work.
There is a version split in half with a dovetail joint if the full size model is too large for your printer, the joint has a 0.2mm tolerance for it to be a press fit connection.
Optionally you may attach rubber feet to the bottom in order to give it grip, this is not required for it to function as intended.