1 / 5
Keycap Clicker Fidget - Print in Place Clicky Key Pad, Desk Toy — zdjęcie 1
1 / 5

Keycap Clicker Fidget - Print in Place Clicky Key Pad, Desk Toy

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Three clicky keys in a tiny case, printed in place: press, click over a detent and spring back.

Ocena
0 / 5
Polubienia
1
Pobrania
26
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A tiny key pad for restless fingers: three keys in a slim case that press down, snap over a detent and spring back. It comes off the bed assembled, with a key-ring tab on the end. Part of the Fidget Toys series.

How it works

  • Each key rides on a 45 degree V tongue in a slot, so it is captive and travels 1.4 mm.

  • - A small bump in each slot gives the click; a 0.8 mm leaf spring under the key pushes it back up.

  • - Prints upside down, no supports: key tops and case rim lie on the bed, the spring and floor are short bridges.

  • - 80 x 24 x 20 mm, with a key-ring hole.

  • - The 4-color 3MF prints a charcoal case with red, yellow and blue keys.

Print settings

  • Layer height: 0.2 mm

  • - Walls: 3, Infill: 20 %

  • - Supports: none

  • - Good bridging settings help: the leaf springs span 27 mm.

  • - PETG gives the springiest keys; PLA works too. Press each key a few times after printing to free it.

  • - About 26 g of filament.

Notes

  • Images are renders of the actual file.

  • - Designed with AI-assisted procedural modeling and checked automatically for printability: watertight mesh, overhang analysis and wall thickness.

More from the shop

New designs drop every day!

Tagi