1 / 7
Snapmaker U1 Ikea Samla top cover Exhaust and inner filtration system — zdjęcie 1
1 / 7

Snapmaker U1 Ikea Samla top cover Exhaust and inner filtration system

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This design is DIY version of official Snapmaker U1 top cover with UI ans slicer control.

Ocena
0 / 5
Polubienia
6
Pobrania
67
Wydruki
0
Wyświetlenia
183
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

You want to build your own top cover for U1 that would be controlled by printer's UI and your slicer? This design makes this possible and adds several features like:

  • Hepa filtering for exhaust system (absent in original top cover)

  • Larger inner filter (original one is smaller and located innefficiently in my opinion)

  • Exhast fans options include both 80 and 120mm

  • A LOT cheaper than the original one. Just requires a bit of soldering.

  • Can be mounted to other types of DIY top cover

For all the details and components check out the comprehensive pdf guide. Use step files to have best slicing results or if you need to adjust anything. To separate all the objects use "split to objects" function in your slicer. 

Print settings:

  • No supports. There are several built in break away suports that you can easily trim off.

  • 2 walls

  • 10% infill

  • use brim or mouse ears if you have adheasion problems.

I personally tested this final version for several months with no clogging or heat creep problems. But if you do face those increase exhaust fan speed and aux fan to keep cold air going around. More radical solution is to just pull out exhaust fan hepa filter. 

Tagi