1 / 2
anvil extendo mag release
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
extendo mag release into triggerguard on anvil
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I extended the mag release into the trigger guard thus you dont need to move your grip around for holdin the mag and releasing so you can hold the front of the mag
this works with both the standard anvil & the full length MXL anvil
requires no extra hardware.
to swap from standard release just unscrew both screws, remove both springs, screw new one together, put 2 springs, insert and screw hinge screw on.
